跳转到主内容

跳到步骤#5

Steven Jackowski编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Carefully remove the board from the device by gently pushing on the screen from the front side. The battery, screen, and scroll wheel are all connected to the logic board. Be sure to support these components so they do not break.
[* black] There is aNote the placement of two additional rubber piece between the logic board and the screenpieces that you must carefully remove. At this point, you should have: three rubber inserts, the top case, the bottom case, andcling loosely to the logic board. It is okay to have the rubber inserts tolet these pieces fall loose.
[* red] One is located below the scrollwheel.
[* blue] Another is located behind the screen.
[* black] There is aNote the placement of two additional rubber piece between the logic board and the screenpieces that you must carefully remove. At this point, you should have: three rubber inserts, the top case, the bottom case, andcling loosely to the logic board. It is okay to have the rubber inserts tolet these pieces fall loose.
[* red] One is located below the scrollwheel.
[* blue] Another is located behind the screen.

图片1

旧版本

新版本