跳转到主内容

跳到步骤#11

Joe编辑

编辑已通过 由 Joe

已删除
已添加
不变

步骤行

[* blackred] Remove 2 screws for fan removal – both 5.6mm length x 2.31 mm width – remove the fan power cable.
[* blackblue] Unscrew 6 spring loaded screws from Heat Sink. These are permanently attached to heat sink and will not come off.
[* black] Unplug connector for PC MCIA terminal port from Motherboard. * note – pull vertically and do not rotate.
[* black] Remove Motherboard by pulling away from Headphone jacks.
[* blackred] Remove 2 screws for fan removal – both 5.6mm length x 2.31 mm width – remove the fan power cable.
[* blackblue] Unscrew 6 spring loaded screws from Heat Sink. These are permanently attached to heat sink and will not come off.
[* black] Unplug connector for PC MCIA terminal port from Motherboard. * note – pull vertically and do not rotate.
[* black] Remove Motherboard by pulling away from Headphone jacks.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加