跳转到主内容

跳到步骤#12

Joe编辑

编辑已通过 由 Joe

已删除
已添加
不变

步骤行

[* black] Remove the upper casing from the bottom casing.
[* icon_caution] *note– when prying shell from laptop – gently pry open 3 tabs by the CD-ROM with spudger.
[* black] There are 6 screws that need to be removed around edge of Motherboard. 4 screws 3.73mm length x 1.90mm width 2 screws 3.80mm length x 1.89mm width *note – one of these is near top left of Dell MCIA. The other is near top left of WWAN.
[* black] Remove the PCMCIA connector from the motherboard
[* black] Turn laptop on side and remove 2 female hex screws from video card and 2 posts from serial port using socket driver (3/16 socket) All hex screws are 10.23mm x 2.66mm size

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

没有之前的图片

已添加