跳转到主内容

跳到步骤#5

Henry编辑

编辑已通过 由 Henry

已删除
已添加
不变

步骤行

[* black] Flip the laptop face up
[* black] Remove the Keyboard bezel.
[* black] Using a Plastic Pry tool carefully pry off the keyboard bezel keeping in mind '''wires are attached''' so do not pull too far or hard.
[* black] Now, remove the keyboard screws then the keyboard there is a ribbon(wires) attached to bottom be careful not to tear it.
[* black] Remove the ribbon and this will allow you to sit the keyboard aside.

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加