跳转到主内容

跳到这一步

Tommy编辑

等待批准

已删除
已添加
不变

步骤行

[* black] To remove the logic board from the body, use the small#00 phillips head screwdriver and remove the small4mm silver screw from right side of the board.
[* black] Next rotate the camcorder so the front is facing you and remove the 4mm silver screw from the front panel.
[* black] To remove the logic board from the body, use the small#00 phillips head screwdriver and remove the small4mm silver screw from right side of the board.
[* black] Next rotate the camcorder so the front is facing you and remove the 4mm silver screw from the front panel.
[* black] Carefully lift the logic board away from the camcorder.