跳转到主内容

跳到这一步

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

[* black] Remove 4 screws from the edges of the lens rear plate. Release a clip near the motor in order to lift off the rear plate. Note that it’s still attached by ribbon cables, and care must be taken not to strain these too much.
-[* black] If disassembling further, note the orientation of the parts.
+[* black] Lift the rear plate just a little in order to inspect the gear chain. Note the order of the gears if you are going to remove them.
+[* black] If disassembling further, note the orientation of the concentric parts.