跳转到主内容

跳到这一步

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

[* black] The plastic gears, guides, guide grooves and sliding surfaces may be lubricated if necessary with a smear of silicone grease, but take care not to get any on the contacts of any of the ribbons.
[* black] The lens must be reassembled starting with the silver barrels and working outwards, and ending with the outermost shell.
[* black] The lens must be reassembled in the extended but not zoomed state.
-[* black] If the image stabilisation cell is removed, its 2 ribbons must be fed through a slot in the outer shell once the lens is reassembled except for the back plate. This is only possible with the lens extended.
+[* black] If the image stabilisation cell is removed, its 2 ribbons must be fed through a slot in the outer shell once the lens is fully reassembled except for the back plate. This is only possible with the lens extended.
[* black] When you get stuck (you ''will ''get stuck!), put it to one side, sleep on it, maybe dream about it, and come back a day or two later.
[* black] Once reassembled, test the lens with a 3v battery pack as previously described, and leave it in the fully retracted state before refitting to the camera.