跳到这一步
由 Philip Le Riche — 编辑
编辑已通过 由 Philip Le Riche
- 之前
- 之后
- 不变
步骤行
| + | [* black] The plastic gears, guides, guide grooves and sliding surfaces may be lubricated if necessary with a smear of silicone grease. |
|---|---|
| [* black] The lens must be reassembled starting with the silver barrels and working outwards, and ending with the outermost shell. | |
| [* black] The lens must be reassembled in the extended but not zoomed state. | |
| [* black] If the image stabilisation cell is removed, its 2 ribbons must be fed through a slot in the outer shell once the lens is reassembled except for the back plate. This is only possible with the lens extended. | |
| [* black] When you get stuck (you ''will ''get stuck!), put it to one side, sleep on it, maybe dream about it, and come back a day or two later. | |
| [* black] Once reassembled, test the lens with a 3v battery pack as previously described, and leave it in the fully retracted state before refitting to the camera. |