跳转到主内容

跳到这一步

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

+[* black] If you dare to disassemble the lens, you're largely on your own! If I can crack it, I'll update this guide. Meanwhile, here are some hints to get you started.
+[* black] Disconnect a ribbon on the bottom of the lens and release the ribbon carrying the socket from its retaining pins.
+[* black] Disconnect 2 ribbons, one on top of the other, on the bottom right hand side of the lens. Lift the ribbon carrying the sockets from its retaining pins and ease the ribbon out of its guides, removing a piece of sticky tape.
+[* black] Gently pull the ribbon connections off the motor.
+[* black] Remove 4 screws from the edges of the lens rear plate. Release a clip near the motor in order to lift off the rear plate. Note that it’s still attached by ribbon cables, and care must be taken not to strain these too much.
+[* black] If disassembling further, note the orientation of the parts.