跳转到主内容

跳到步骤#15

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

[* black] Lens disassembly and reassembly is much harder and I haven't yet fully mastered it. However, you can test the operation of the lens mechanism as follows. (Do this after reassembly if you strip it down.)
- [* black] Gently lift the ribbon cable connections off the 2 tags on the back of the motor.
+ [* black] Gently lift the ribbon cable connections off the two tags on the back of the motor.
[* black] Apply power to the motor from a 3v battery pack by connecting it to the two tags on the motor. Apply positive to the terminal to the front of the lens to extend it, or to the back of the lens to retract. (Keep all ribbons out of the way - applying power inadvertently to the wrong place could damage something.)

图片1

没有之前的图片

已添加