跳到步骤＃12
由 Philip Le Riche — 编辑
编辑已通过 由 Philip Le Riche
- 之前
- 之后
- 不变
步骤行
| [* black] Gently lift off 2 snap-on connectors at the top of the main logic board, and two on the left hand side next to the lens assembly. | |
| [* black] Disconnect a ribbon from a connector behind the on/off button. | |
| + | [* black] You can now separate the logic assembly, battery compartment and top control panel as a unit from the lens and flash assembly. you will need to gently ease the red-eye LED out of its slot in the lens assembly. |