跳转到主内容

跳到步骤#4

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

[* black] Remove the 2 screws in the bottom case front section.
[* black] Remove a screw from the top, adjacent to the mode wheel.
[* black] Remove the front cover. This requires a fair amount of wiggling in order to release it at the top.There is a hidden clip just to the left of the on/off button which requires a little force to release. Easy does it.
+ [* black] Note the long finger on the top of the front cover which protruded under the top panel to engage with the screw removed in the second bullet. This is very easily bent and broken off. Reattaching it would be challenging. Bear this in mind when you put this part aside, especially if you will be storing it for a little while before reassembly.