跳到步骤＃19
由 Sam Goldheart — 编辑
编辑已通过 由 Sam Goldheart
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] To remove the upper component board you will be pulling gently on its cable while lifting it up enough to clear the battery, but not high enough to scrape against the rear case. Go slowly and carefully. |
|---|---|
| + | [* black] Insert the tip of a spudger under the upper component control board to lift it slightly. |
| + | [* black] Pull the board up and out of the space between the battery and the rear case bezel. |
| + | [* black] Remove the upper component control board. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加