跳转到主内容

跳到步骤#16

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

[* black] Insert a spudger under the GPS connector end of the upper component board and lift it up off of its adhesive.
[* icon_caution] Be very careful not to scrape the board against the top of the rear case.
+[* icon_reminder] The GPS antenna cable will slide out of its ZIF socket when you do this. On reassembly, fit the cable back into the socket as you replace the upper component board.