跳转到主内容

跳到步骤#1

Stephen Bond编辑

编辑已通过 由 Stephen Bond

之前
之后
不变

步骤行

-[* black] Unscrew both screws securing the cover panel with a #1 size Phillips head screwdriver. Note the location of the panel relative to the stickers on the bottom of the laptop.
+[* black] Remove the hard drive screw labeled with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover off.
+[* black] Using the plastic flap, grasp your hand on it and pry the hard drive out of its slot.

图片1

旧版本

新版本

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加