跳转到主内容

跳到步骤#2

Jay Shah编辑

编辑已通过 由 Adam O'Camb

已删除
已添加
不变

步骤行

[* blue] Turn the computer over and remove the two M2.5 x 5-mm screws screws from the top of the palm restrest. (M2.5 x 5-mm )
[* green] Disconnect the mouse pad cable formfrom the main boardboard.
[* yellow] Starting at the back centrecenter of the palm rest, separate the palm rest from the base by lifting the inside edge of the palm restrest.
[* icon_caution] Use careBe careful when separating the palm rest from the basebase, to avoid damage to the palm rest.
[* blue] Turn the computer over and remove the two M2.5 x 5-mm screws screws from the top of the palm restrest. (M2.5 x 5-mm )
[* green] Disconnect the mouse pad cable formfrom the main boardboard.
[* yellow] Starting at the back centrecenter of the palm rest, separate the palm rest from the base by lifting the inside edge of the palm restrest.
[* icon_caution] Use careBe careful when separating the palm rest from the basebase, to avoid damage to the palm rest.