Skip to main content

Changes to Step #2

Edit by Adam O'Camb

编辑已通过 by Adam O'Camb

Deleted
Added
Unchanged

Step Lines

[* blue] Turn the computer over and remove the two screwsM2.5 x 5-mm screws from the top of the palm rest. (M2.5 x 5-mm )
[* blue] Turn the computer over and remove the two screwsM2.5 x 5-mm screws from the top of the palm rest. (M2.5 x 5-mm )
[* green] Disconnect the mouse pad cable from the main board.
[* yellow] Starting at the back center of the palm rest, separate the palm rest from the base by lifting the inside edge of the palm rest.
[* icon_caution] Be careful when separating the palm rest from the base, to avoid damage to the palm rest.