Skip to main content

Changes to Step #2

Edit by Whitney Lunny

编辑已通过 by Whitney Lunny

Deleted
Added
Unchanged

Step Lines

[* blue] Turnblack] Position the computer over and removekeyboard side up.
[* red] Remove
the two M2.5 x 5-mm screws from the top of the palm rest.
[* greenorange] Disconnect the mouse pad cable from the main board.
[* yellow] Starting at the back center of the palm rest, separateSeparate the palm rest from the base by lifting theits inside edge ofedge. Start at the palm restback center.
[* icon_caution] Be careful when separatingto avoid damaging the palm rest while separating it from the base, to avoid damage to the palm restbase.
[* blue] Turnblack] Position the computer over and removekeyboard side up.
[* red] Remove
the two M2.5 x 5-mm screws from the top of the palm rest.
[* greenorange] Disconnect the mouse pad cable from the main board.
[* yellow] Starting at the back center of the palm rest, separateSeparate the palm rest from the base by lifting theits inside edge ofedge. Start at the palm restback center.
[* icon_caution] Be careful when separatingto avoid damaging the palm rest while separating it from the base, to avoid damage to the palm restbase.

Image 1

Old Version

New Version