跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#3

Leon Riley编辑

编辑已通过 由 Andrew W.

之前
之后
不变

步骤行

[* black] Detach the ribbon cable connecting the LED/USB Connector Assembly with the Motherboard. Motherboard is the base of the whole controller.
[* black] Detach the ribbon cable connecting the LED/USB Connector Assembly with the Motherboard. Motherboard is the base of the whole controller.
[* black] Do this by simply pulling on it - there are no tabs or anything fancy
[* icon_reminder] You will need to block off the last 2 Pins - counting from left to right