跳转到主内容

跳到步骤#5

Nicolas Siemsen编辑

编辑已通过 由 Nicolas Siemsen

已删除
已添加
不变

步骤行

[* black] Pull the cluster out until you feel the tension of the speedometer cable.
[* black] Normally, there will be just barely enough room for you to get your hand behind the cluster. You will need to feel around the center of the cluster, behind and to the right of the center of the speedometer cable, for the connection for the speedometer cable.
[* black] The cable screws on to the back of the cluster with a knurled knob. It is to be loosened by hand. No tools will be necessary to unscrew this. Unscrew the cable until it is free of the cluster.
[* icon_note] If your speedometer cable is especially taught behind the cluster, you may need to go back to step 2 and try to remove it by feel before pushing the cluster out by hand.