跳到步骤＃8
由 Justin Thomas — 编辑
编辑已通过 由 Justin Thomas
- 之前
- 之后
- 不变
步骤行
| [* icon_caution] A ribbon wire connects the rear panel to the inside of the camera. Breaking this wire would make your rear screen and buttons non-functional. | |
| [* black] Carefully use your fingers to tilt the back panel downward. | |
| - | [* black] Use the flat end of the spudger to gently pry off the ribbon wire from the camera. |
| + | [* black] Use the flat end of the spudger to gently pry off the ribbon wire from the inside of the camera. |
| [* icon_note] It may be helpful to move the spudger from the left of the wire to the right when trying to remove it. |