跳到步骤#3
由 Allison Michel — 编辑
编辑已通过 由 Allison Michel
- 之前
- 之后
- 不变
步骤行
[* black] Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device. [* black] After inserting |
[* black] Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device. [* black] After inserting |
[* black] Pry the device open from the other side also if it does not fully disassemble from one side. |