跳到步骤#3
由 Jonathan Molina — 编辑
编辑已通过 由 Jonathan Molina
- 之前
- 之后
- 不变
步骤行
[* black] Firmly holding the Gear, insert the pointed flat side spudger at an angle to pry the back casing off of the device. |
[* black] After inserting the spudger, move the flat end of the tool along the sides of the Gear to completely detach the back and front components. |
[* black] Pry the device open from the other side also if it does not fully disassemble from one side. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加