跳到步骤＃1
由 Andy Maness — 编辑
编辑已通过 由 Andy Maness
- 之前
- 之后
- 不变
步骤行
| [* black] There are two "safety belt" tabs that need to be taken off in order to remove the digitizer. |
| [* red] One is attached to the camera, located at the top of the Gear, and the other is located on the left side. |
| [* black] To remove, use tweezers to grab [* black] Lift |
| [* black] To remove, use tweezers to grab [* black] Lift |
| [* icon_caution] When removing the metal plates, be sure to remove them carefully as to not rip the orange tape that is attached to them. |
| [* icon_reminder] During reassembly, be sure to line up the pins of the metal plate in order to reattach correctly. |