跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#1

Allison Michel编辑

编辑已通过 由 Allison Michel

之前
之后
不变

步骤行

[* black] There are two "safety belt" tabs that need to be taken off in order to remove the digitizer.
[* red] One is attached to the camera, located at the top of the Gear, and the other is located on the left side.
[* black] To remove, use tweezers to grab the metal plate.
[* black] Lift up to remove the metal plate, it should stillplate.
[* icon_caution] When removing the metal plates,
be attachedsure to remove them carefully as to not rip the device by orange tapetape that is attached to them.
[* icon_reminder] During reassembly, be sure to line up the pins of the metal plate in order to reattach correctly
.
[* black] Lift up to remove the metal plate, it should stillplate.
[* icon_caution] When removing the metal plates,
be attachedsure to remove them carefully as to not rip the device by orange tapetape that is attached to them.
[* icon_reminder] During reassembly, be sure to line up the pins of the metal plate in order to reattach correctly
.