跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#15

Jeff Suovanen编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

[* black] Close up the case case! You're donedone.
[* black] I had some issues getting it to clamp back properly - checkproperly—check the part of the case with the groove on the edge for any left over pieces of plastic, and try your best to get them outout.
[* black] You can glue the case back together, or, in my case, since I had none, I used clear duct tape to stick it back togethertogether.
[* icon_note] Make sure you take good care of the wire from now on -on; make sure it doesn't get bent when you carry it aroundaround. :)
[* black] Close up the case case! You're donedone.
[* black] I had some issues getting it to clamp back properly - checkproperly—check the part of the case with the groove on the edge for any left over pieces of plastic, and try your best to get them outout.
[* black] You can glue the case back together, or, in my case, since I had none, I used clear duct tape to stick it back togethertogether.
[* icon_note] Make sure you take good care of the wire from now on -on; make sure it doesn't get bent when you carry it aroundaround. :)