跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#12

Jeff Suovanen编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

[* black] Thread the rubber/plastic stopper back onto the wires
[*
wires.
[*
icon_caution] Do this AFTER you have applied solder to the tips of the wires
[*
wires.
[*
black] To do this, I sprayed a bit of alcohol on the whole thing, and pulled the wires with the pliers; itpliers. It required a pretty decent amount of force - butforce—but don't worry, the cables should hold without a problem - justproblem. Just make sure you're pulling both at the same time
[*
time.
[*
red] Note that I've also added a tiny length of shrink-tube on the exposed wirewire.
[* black] Thread the rubber/plastic stopper back onto the wires
[*
wires.
[*
icon_caution] Do this AFTER you have applied solder to the tips of the wires
[*
wires.
[*
black] To do this, I sprayed a bit of alcohol on the whole thing, and pulled the wires with the pliers; itpliers. It required a pretty decent amount of force - butforce—but don't worry, the cables should hold without a problem - justproblem. Just make sure you're pulling both at the same time
[*
time.
[*
red] Note that I've also added a tiny length of shrink-tube on the exposed wirewire.