跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#12

Darie H编辑

编辑已通过 由 Darie H

之前
之后
不变

步骤行

[* black] Thread the rubber/plastic stopper back onto the wires
[* icon_caution] Do this AFTER you have applied solder to the tips of the wires
[* black] To do this, I sprayed a bit of alcohol on the whole thing, and pulled the wires with the pliers; it required a pretty decent amount of force - but don't worry, the cables should hold without a problem - just make sure you're pulling both at the same time
[* red] Note that I've also added a tiny length of shrink-tube on the exposed wire

图片1

没有之前的图片

已添加