跳转到主内容

跳到步骤#6

iRobot编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Remove the following 10 screws from the bottom case:
[* red] Three 1.7 mm Phillips from the front edge of the battery compartment.
[* orange] One 3.9 mm T8 Torx to the right of the memory card.
[* yellow] One 6.9 mm T8 Torx at the left edge of the memory compartment.
[* green] Three 12.4 mm Phillips from the center of the row of screws along the back edge of the case.
[* blue] Two 15.1 mm Phillips, one from either end of the row of screws along the back edge of the case.

图片1

没有之前的图片

已添加