跳转到主内容

跳到步骤#5

Luke Soules编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_caution] For this step, you only need to move the connector about 2 mm. Pulling too hard or too far will damage the connector.
[* black] Loosen the trackpad connector by pulling the locking bar toward the battery housing, using the tips of your fingers.
[* black] Slide the trackpad cable out of the loosened connector.
[* icon_reminder] When reattaching the trackpad ribbon cable, make sure that the orange cable is slid into the connector above the locking bar.

图片1

没有之前的图片

已添加