跳转到主内容

跳到步骤#4

Chris Born编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_note] This is a diagram of the trackpad ribbon clamp connector you will disconnect in the next step.
[* black] 1) With your fingernails, grasp the locking bar on either side slide it a small amount (about 1/16" or 2 mm) towards the battery.
[* black] 2) After disengaging the locking bar, slide the cable out of the connector.

图片1

没有之前的图片

已添加