跳转到主内容

跳到步骤#9

Alexander编辑

编辑已通过 由 Alexander

已删除
已添加
不变

步骤行

[title] Familiarize yourself with a desoldering tool
[* black] Desoldering tools are great for cleaning up mistakes. They're really easy to use!
[* black] Apply a copious amount of solder to the battery pad, as explained in the previous step. [photo with copious solder, iron, and desoldering tool in play]
[* black] Depress the plunger in the desoldering tool until it clicks.
[* black] Heat up the joint until the solder flows.
[* black] Press the tip of the desoldering tool into the pool of solder. Simultaneously press the return button on the tool.
[* black] Whoop! Away goes the solder! Press the plunger down again to release the solder it collected. [photo with iron and desoldering tool in play, solder gone]
[* icon_note] If at any point in this tutorial you make a mistake, just remove the solder from the joint with this method and start that step over.

图片1

没有之前的图片

已添加