跳转到主内容

跳到步骤#3

Joshua Lessard编辑

编辑已通过 由 Joshua Lessard

之前
之后
不变

步骤行

-[* black] Use the plastic opening tool to separate the front panel of the laptop from the back panel.
-[* black] Once the two panels are separated, carefully and gently pull the front and back panel approximately 1 inch away from one another.
-[* black] Once you have a good distance of separation between the panels, unscrew and remove the 4 screws on each side of the laptop, 8 in total.
+[* black] Use the plastic opening tool to separate the front panel of the laptop from the back panel, pulling the front panel off the laptop.
+[* black] Once the two panels are separated, carefully and gently pull the back panel approximately 1 inch away from the screen.
+[* black] Once you have a good distance of separation between the back panel and the screen, unscrew and remove the 4 screws on the left and right side of the screen, 8 screws in total.