跳转到主内容

跳到步骤#4

Jeremy Thompson编辑

编辑已通过 由 Jeremy Thompson

已删除
已添加
不变

步骤行

[* black] Remove the cables circled in red by carefully lifting up on them with a prying tool.
[* black] Remove the flex cable with the green circle by lifting the black clip to the right with a prying tool. See second picture, the clip lifts up and towards the cable. Remove the front facing camera and set aside.
[* black] Remove the flex cable with the green circle by lifting the black clip to the right with a prying tool. See second picture, the clip lifts up and towards the cable. Remove the front facing camera and set aside.
[* black] There is one screw securing the motherboard at the bottom next to the Micro SD slot. (Circled in red in third picture)
[* black] Remove the motherboard from the frame (paying careful attention to the flex cables) and set it aside.
[* black] Now that we have removed the motherboard we can safely remove the glass and digitizer.