跳转到主内容

跳到步骤#3

Alex Bendoyro编辑

等待批准

已删除
已添加
不变

步骤行

[* black] After removingUse the spudger to remove the back side of the phone,phone. the keypad will be on the piece of the phone that still is connected to the screen.
[* icon_caution] The logic board is still connected to the rest of the phone with a gold strip; be careful when removing the board.
[* black] After removingUse the spudger to remove the back side of the phone,phone. the keypad will be on the piece of the phone that still is connected to the screen.
[* icon_caution] The logic board is still connected to the rest of the phone with a gold strip; be careful when removing the board.
[* black] Use the spudger to gently push the keypad out from the other side of the phone.
[* icon_caution] When reassembling the phone, keep in mind the position of the volume buttons. The foam piece behind the volume buttons must be put back correctly for the buttons to work properly.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加