跳转到主内容

跳到步骤#9

Stefan Van pellicom编辑

编辑已通过 由 Stefan Van pellicom

之前
之后
不变

步骤行

+[* black] Disconnect the bottom left ribbon cable. Hook your fingernails behind the right and left nothes of the black connector part, and pull it towards the brown ribbon cable with even and L/R balanced force until loose. FRAGILE ! The cable will slide out easily.
+[* black] For reassembly : notice this cable is UNDER the black connector wedge. Put the cable back in place, and push the black wedge back in, again balancing force left and rigt.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加