跳转到主内容

跳到步骤#8

Stefan Van pellicom编辑

编辑已通过 由 Stefan Van pellicom

之前
之后
不变

步骤行

-[* black] Disconnect the right ribbon cable.
+[* black] Disconnect the right ribbon cable. Hook your fingernails behind the right and left nothes of the black connector part, and pull it towards the white ribbon cable with even and L/R balanced force until loose. FRAGILE ! The cable will slide out easily.
+[* black] For reassembly : notice this cable is ON TOP of the black connector wedge. Put the cable as intended, and push the black wedge back in place, again balancing force left and rigt.