跳转到主内容

跳到步骤#4

Stefan Van pellicom编辑

编辑已通过 由 Stefan Van pellicom

之前
之后
不变

步骤行

+[* black] Gently lift the housing top, and slide it back while lifting.
+[* black] You will find the whole camera module wrapped in thick cellophane. For reasons of heat dispersal and prolonged life, I would recommend disposing of it during following steps. But only if your camera is for indoor use ! Outdoor cams might benefit from the wrapping, containing the heat in the camera module, preventing condensation/corrosion.
+[* black] Optional : for reassembly, some adhesive tape might come in handy to hold down the flat cables.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加