跳转到主内容

跳到步骤#4

Jaden Laidig编辑

编辑已通过 由 Jaden Laidig

已删除
已添加
不变

步骤行

[* blackyellow] Before removing the circuit board, you will need to disconnect the blue ribbon cable, two orange ribbon cables, and small connector.
[* icon_noteorange] The orange ribbon cables are held in place by a small locking mechanism. Lift the small brown tabs for easy disconnection.
[* blackyellow] Before removing the circuit board, you will need to disconnect the blue ribbon cable, two orange ribbon cables, and small connector.
[* icon_noteorange] The orange ribbon cables are held in place by a small locking mechanism. Lift the small brown tabs for easy disconnection.
[* red] Remove the two, 20mm silver screws holding the circuit board in place.