跳转到主内容

跳到步骤#4

Sam编辑

编辑已通过 由 Sam

已删除
已添加
不变

步骤行

[* black] Before removing the circuit board, you will need to disconnect the blue ribbon cable, two orange ribbon cables, and small connector.
[* blackicon_note] The orange ribbon cables are held in place by a small locking mechanism. Lift the small brown tabs for easy disconnection.
[* black] Remove the two, long20mm silver screws holding the circuit board in place
[* blackicon_note] The orange ribbon cables are held in place by a small locking mechanism. Lift the small brown tabs for easy disconnection.
[* black] Remove the two, long20mm silver screws holding the circuit board in place

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

旧版本

新版本