跳转到主内容

跳到步骤#5

Ruben Puentes编辑

编辑已通过 由 Ruben Puentes

已删除
已添加
不变

步骤行

[* black] Insert wisdom herered] Remove the five 5mm screws located throughout the motherboard with the screwdriver. Use the T10 Torx screwdriver head.
[* yellow] Pull up on each metal tab located at the rear of the projector. There are 5 tabs.
[* icon_caution] Do not pull up on the metal tabs too hard or too fast because they can break easily
.
[* black] Insert wisdom herered] Remove the five 5mm screws located throughout the motherboard with the screwdriver. Use the T10 Torx screwdriver head.
[* yellow] Pull up on each metal tab located at the rear of the projector. There are 5 tabs.
[* icon_caution] Do not pull up on the metal tabs too hard or too fast because they can break easily
.

图片1

旧版本

新版本