跳转到主内容

跳到这一步

Edgar Palacios编辑

编辑已通过 由 Edgar Palacios

已删除
已添加
不变

步骤行

[* red] Remove the two screws underneath the circuit board. They are located at the corners of the trapezoid.
[*
blue] Slowly pull up on the motherboard. Avoid tangling the wires and pulling too hard on the white electrical strip located near the lens. Wiggle the board gently if necessary.
[* red] Remove the two screws underneath the circuit board. They are located at the corners of the trapezoid.
[*
blue] Slowly pull up on the motherboard. Avoid tangling the wires and pulling too hard on the white electrical strip located near the lens. Wiggle the board gently if necessary.

图片1

旧版本

新版本

图片2

已删除

图片3

已删除