跳转到主内容

跳到步骤#1

Nishant Mattu编辑

编辑已通过 由 Nishant Mattu

已删除
已添加
不变

步骤行

[* black] Flip the projector right-side up and turn it so that the back ports are facing you.
[* green] Remove the 7mm metallic hex screws using the flat-head screwdriver.
[* red] Remove the two black 10mm screws using the torxTorx 10 screwdriver head. The screws are located at the center of the back panel.
[* red] Remove the two black 10mm screws using the torxTorx 10 screwdriver head. The screws are located at the center of the back panel.