跳转到主内容

跳到这一步

Edgar Palacios编辑

编辑已通过 由 Edgar Palacios

已删除
已添加
不变

步骤行

[* red] Unplug the speaker wires from the top circuit board by simultaneously squeezing the sides and pulling.
[* blue] UnscrewRemove the #ten 5.5mm screws located on the lid circuit board.board with the Phillips 0 screwdriver
[* blue] UnscrewRemove the #ten 5.5mm screws located on the lid circuit board.board with the Phillips 0 screwdriver
[* icon_caution] Carefully hold the lid in place as you remove the screws to avoid ripping the electrical strip from the circuit board.
[* black] Slowly bring down the top circuit board, while holding on to the plastic bottom strip.