跳转到主内容

跳到步骤#2

Ruben Puentes编辑

编辑已通过 由 Ruben Puentes

已删除
已添加
不变

步骤行

[* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head.
[* yellow] Next, remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head.
[* black] Flip the projector back over.
[* icon_caution] Lift up the main lid cautiously to avoid ripping the electrical strips.