跳到步骤#4
由 Andy Maness — 编辑
编辑已通过 由 Andy Maness
- 之前
- 之后
- 不变
步骤行
[* black] While pulling the bottom down, remove the back of the camera. [* icon_caution] Be careful no to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board. |
[* black] While pulling the bottom down, remove the back of the camera. [* icon_caution] Be careful no to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board. |