跳转到主内容

跳到步骤#4

Gerik Kubiak编辑

编辑已通过 由 Gerik Kubiak

已删除
已添加
不变

步骤行

[* black] While pulling the bottom down, remove the back of the camera.
[* icon_caution] Be careful not to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board.
[* black] TALK ABOUT SPUDGERicon_note] To disconnect the ribbon cable pull the small black tab upward and pull gently on the cable.
[* black] TALK ABOUT SPUDGERicon_note] To disconnect the ribbon cable pull the small black tab upward and pull gently on the cable.

图片1

旧版本

新版本

图片2

旧版本

新版本