跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#9

iRobot编辑

等待批准

之前
之后
不变

步骤行

[* black] Place enough pressure on the upper case to allow you to slide a tool just within the seam between upper case and lower case as shown in the picture. A dentist's hook, push pin, or similar tool will work.
[* icon_note] Do not yank the upper case off as soon as you free the clasp. The case is attached to the logic board via two ribbon cables.
[* black] Delicately slip the tip of your tool behind the silver metal latch and pull it forward while pulling up on the case. This may take some effort.

图片1

没有之前的图片

已添加