跳转到主内容

跳到步骤#3

Kevin Daily编辑

编辑已通过 由 Kevin Daily

已删除
已添加
不变

步骤行

[* red] Use a 5.5mm flathead #5.5 screwdriver to anchor the backing bracket located on the inside of the binding.
[* red] Use a 5.5mm flathead #5.5 screwdriver to anchor the backing bracket located on the inside of the binding.
[* orange] Using a Phillips #2 screwdriver, locate and unscrew the countersunk ovalhead M4 x 16mm screw holding the heel strap connector to the binding.