跳转到主内容

跳到步骤#3

Kevin Daily编辑

编辑已通过 由 Kevin Daily

已删除
已添加
不变

步骤行

[* red] LocateUsing a Phillips #1 screwdriver, locate and unscrew the Phillips M4 x 16mm screw holding the heel strap connector to the binding.
[* orange] Use a Flathead screwdriver to anchor the backing bracket located on the inside of the binding.
[* black] Then using a Phillips # 0 screwdriver, unscrew the binding connector and set it aside.
[* red] LocateUsing a Phillips #1 screwdriver, locate and unscrew the Phillips M4 x 16mm screw holding the heel strap connector to the binding.
[* orange] Use a Flathead screwdriver to anchor the backing bracket located on the inside of the binding.
[* black] Then using a Phillips # 0 screwdriver, unscrew the binding connector and set it aside.